NINE MILE METALS DDH WD-26-12 INTERSECTS 2 HIGH GRADE VMS ZONES OVER 20M INCLUDING 3.33% CU-EQ OVER 12.0M, 4.40% CU-EQ OVER 7.0M WITH 8.35% ZN OVER 7.0M WITH A PEAK INTERSECT OF 8.40% CU-EQ
TORONTO, ONTARIO – November 5th, 2026 – Nine Mile Metals Ltd. (CSE: NINE | OTCQB: VMSXF | FSE: KQ9) (the “Company” or “Nine Mile”) is pleased to announce assay results for DDH WD-26-12 at the Wedge Mine in the Bathurst Mining Camp, New Brunswick. DDH WD-26-12 was collared in the southwest, at the edge of our drill pattern (oriented at 355°, angled -65° below horizontal), to a depth of 155 meters. Collared in graphitic sediments, the drill hole intersected deformed sediments and volcanics at approximately 120 meters before intersecting (2) distinct Zones of high-grade VMS mineralization carrying copper, lead, zinc, silver and gold, the zones interrupted by a 2.90-meter void. The host rocks consisted of felsic volcanics with massive sulphide intersected at 121.00 meters continuing to 133 meters. Mineralization consisted of visible pyrite, chalcopyrite and local thin bands of sphalerite and galena as seen in Figures 1 through 4. Assay results show Au, Ag, Pb and Zn values increasing with depth. Below the void, a second zone of VMS mineralization was intersected continuing to 141.00 meters. Mineralization consisted of fine-grained pyrite and chalcopyrite with assays showing an increase in Cu. The hole was terminated in sediments at 155.00 meters. Intersections are of true width. Figure 1: Sample #396555 (8.40% Cu-Eq) (0.67% Cu, 4.88% Pb, 17.05% Zn, 111 g/t Ag, 0.581 g/t Au) Figure 2: Sample #396552 (4.70% Cu-Eq)(0.39% Cu, 1.66% Pb, 8.94% Zn, 55 g/t Ag, 0.72 g/t Au) TABLE 1: KEY INTERSECTIONS (WEIGHTED AVERAGE GRADE OVER EACH ZONE) ** 2.90M VOID Lens Zone From (m) To (m) Width (m) Silver (g/t) Gold (g/t) Copper (%) Lead (%) Zinc (%) Copper- Eq. (%) Zone Above Void Including IncludingIncluding 121.00 126.00 127.00131.00 133.00 133.00132.00132.00 12.00 7.00 5.001.00 34.99 49.29 54.20111.00 0.54 0.690.700.581 0.61 0.350.380.67 1.16 1.771.924.88 5.24 8.359.3417.05 3.33 4.404.828.40 Zone Below Void 135.90 141.00 5.10 34.39 0.51 0.91 2.56 1.99 2.85 Including 139.00 141.00 2.00 28.00 0.57 1.77 0.57 1.94 3.40 Gary Lohman, P.Geo., VP Exploration and Director, stated, “We continue to expand the mineralized footprint in the southwest and northeast with both base and precious metal assays contributing to the overall rock value. With the grades encountered to date and increased drilling, we anticipate expanding the tonnage at the Wedge. We now are concentrating on our exploration model for 43-101 and MRE execution.” TABLE 2: DDH WD-26-12 CERTIFIED ASSAYS – (SAMPLE BY SAMPLE) From (m) To (m) Width (m) Sample # Silver (g/t) Gold (g/t) Copper (%) Lead (%) Zinc (%) Copper- Eq. (%) 120.00 121.00 1.00 396544 <1 0.013 0.03 0.01 0.03 0.06% 121.00 122.00 1.00 396545 26 0.683 0.89 0.93 3.81 3.18% 122.00 123.00 1.00 396546 6 0.047 0.30 0.11 0.06 0.47% 123.00 124.00 1.00 396547 13 0.065 3.43 0.15 0.44 3.84% 124.00 124.95 0.95 396548 <1 0.021 0.02 0.01 0.06 0.06% 124.95 126.00 1.05 396549 28 0.811 0.26 0.31 0.07 1.58% 126.00 127.00 1.00 396550 36 0.868 0.21 1.53 4.48 3.11% 127.00 128.00 1.00 396551 30 0.717 0.16 0.99 9.47 4.15% 128.00 129.00 1.00 396552 55 0.720 0.39 1.66 8.94 4.70% 129.00 130.00 1.00 396553 31 0.720 0.24 0.96 6.11 3.30% 130.00 131.00 1.00 396554 44 0.781 0.45 1.14 5.15 3.52% 131.00 132.00 1.00 396555 111 0.581 0.67 4.88 17.05 8.40% 132.00 133.00 1.00 396556 38 0.470 0.36 1.25 7.22 3.62% 133.00 135.90 2.90 Void 135.90 137.00 1.10 396557 84 0.800 0.43 9.72 1.97 4.35% 137.00 138.00 1.00 396558 9 0.355 0.04 0.36 1.15 0.91% 138.00 139.00 1.00 396559 18 0.230 0.59 0.84 2.96 2.05% 139.00 140.00 1.00 396561 36 0.598 1.72 0.71 2.48 3.67% 140.00 141.00 1.00 396562 20 0.537 1.83 0.44 1.41 3.13% 141.00 143.50 2.50 Void 143.50 145.00 1.50 396563 <1 0.021 0.03 0.01 0.06 0.07% 145.00 146.50 1.50 396564 <1 0.016 0.01 0.01 0.03 0.04% 146.50 148.00 1.50 396565 <1 0.014 0.03 0.00 0.05 0.06% 148.00 149.50 1.50 396566 <1 <0.005 0.05 0.00 0.08 0.08% 149.50 151.00 1.50 396567 <1 0.013 0.28 0.00 0.15 0.35% 151.00 152.50 1.50 396568 <1 0.005 0.11 0.00 0.14 0.17% 152.50 153.50 1.00 396569 <1 <0.005 0.09 0.00 0.07 0.12% 153.50 155.00 1.50 396570 <1 <0.005 0.02 0.00 0.06 0.04% Values in red are the peak sample for each metal. Copper Equivalent (Cu-Eq) combines all five metals into one comparable grade, calculated using August 26, 2026, Kitco pricing: US$6.52/lb. Cu, US$0.85/lb. Pb, US$1.84/lb. Zn, US$67.77/oz Ag, US$4,591.50/oz Au, with a uniform 95% metallurgical recovery assumed for all metals; since it is unclear which metals will be the principal products, assuming differing recoveries by metal is premature at this stage. Copper equivalent grades are for comparative purposes only and do not represent recoverable metal. Figure 3: Sample #396551 (4.15% Cu-Eq)(0.16% Cu, 0.99% Pb, 9.47% Zn, 30 g/t Ag, 0.717 g/t Au) Figure 4: Sample #396553 (3.30% Cu-Eq)(0.24% Cu, 0.96% Pb, 6.11% Zn, 31 g/t Ag, 0.72 g/t Au) Patrick J. Cruickshank, MBA, CEO & Director, stated, “Hole WD-26-12 intersected an outstanding Zinc – Lead – Silver Lens over 20m. We know the silver carries with the zinc in this lens. This lens also returned very decent gold over 20m, and we had 3 very good Copper samples too, up to 3.43%. We are pleased to announce that the BHEM Team is onsite and has commenced our BHEM Surveys at the Wedge. They were delayed from their previous work program. This will confirm the footprint of the newly discovered Eastern Extension that continues to impress. But more importantly, we can address the high-priority western flank and the deposit at depth. We look forward to our next release and updating our SGS and Glencore Metallurgical Analysis as soon as we receive the final QA/QP Report from SGS Lakefield. All analysis is complete and report expected imminently.” Figure 5: Location of DDH WD-26-12 Analysis, QAQC and Qualified Person All samples were submitted to ALS Global in Moncton, an independent commercial laboratory,
NINE MILE METALS DDH WD-26-15 INTERSECTS (2) VMS ZONES RETURNING 4.88% CU-EQ OVER 7.6M AND ACQUIRES 14.42 KM² OF NEW STRATEGIC CLAIMS AT NINE MILE BROOK PROJECT
Zone 1 – (34.89 g/t Ag, 0.68 g/t Au, 1.56% Cu, 1.72% Pb and 6.59% Zn) over 7.6m (4.88% Cu-Eq)Zone 2 – (29 g/t Ag, 0.538 g/t Au, 0.70% Cu, 1.14% Pb and 3.71% Zn) over 1.2m (2.89% Cu-Eq) TORONTO, ONTARIO – October 15, 2026 – Nine Mile Metals Ltd. (CSE: NINE | OTCQB: VMSXF | FSE: KQ9) (the “Company” or “Nine Mile”) is pleased to announce assay results for DDH WD-26-15 at the Wedge Mine in the Bathurst Mining Camp, New Brunswick. Nine Mile is also pleased to have acquired (2) strategic project claim blocks at its Flagship Nine Mile Brook Project. DDH WD-26-15 was collared in the southwest, at the edge of our drill pattern (oriented at 325°, angled -65° below horizontal), to a depth of 131 meters. Collared in graphitic sediments, the drill hole was successful, intersecting high-grade VMS mineralization between 114.50 – 122.10 meters (4.88% Cu-Eq over 7.60m) followed by black argillaceous sediment, clipping a second band of VMS between 128.60 – 129.80 meters (2.89% Cu-Eq over 1.20m) before terminating in sediments at 131.00 meters. The mineralization consisted of pyritic VMS with visible chalcopyrite, local galena and sphalerite (Figures 1–4). Assay values, especially for Ag, Pb and Zn, were consistently high throughout the VMS intersection. The intersections reported are of true width. Gary Lohman, P.Geo., VP Exploration and Director, stated, “WD-26-15 hit exactly what we’ve come to expect from the southwest: massive pyritic VMS with visible chalcopyrite, galena and sphalerite. Collared at the edge of the pattern, it cut a thinner section of the lens, and that helps us map its shape. The silver and gold have now shown up in every hole we’ve reported from the southwest, and that’s quickly becoming one of the defining features of this program. Mike Dufresne and the APEX team are building every meter into a live 3D model. Next up are eight BHEM surveys on our perimeter holes to show us the conductive footprint beyond the pattern, and those results will steer our second round of drilling, starting with the priority western flank.” FIGURE 1: Sample #396622 (52 g/t Ag, 0.88 g/t Au, 2.40% Cu, 2.78% Pb, 5.88% Zn) 6.12% Cu-Eq TABLE 1 · DDH WD-26-15 CERTIFIED ASSAYS – (SAMPLE BY SAMPLE) From(m) To(m) Width(m) Sample # Silver(g/t) Gold(g/t) Copper(%) Lead(%) Zinc(%) Copper-Eq. (%) 111.50 113.00 1.50 396614 1.00 0.005 0.03 0.01 0.05 0.06% 113.00 114.50 1.50 396615 1.00 <0.005 0.02 0.01 0.09 0.07% 114.50 116.00 1.50 396616 32.00 0.419 2.02 1.04 5.34 4.58% 116.00 117.00 1.00 396617 25.00 0.716 0.60 1.40 10.55 4.88% 117.00 118.00 1.00 396618 27.00 0.695 0.79 1.59 8.07 4.40% 118.00 119.00 1.00 396619 32.00 0.592 1.17 2.03 8.96 5.06% 119.00 120.00 1.00 396621 24.00 0.725 1.25 0.69 2.15 3.06% 120.00 122.10 2.10 396622 52.00 0.880 2.40 2.78 5.88 6.12% 122.10 123.10 1.00 396623 2.00 0.013 0.04 0.02 0.13 0.12% 123.10 124.60 1.50 396624 1.00 0.009 0.03 0.02 0.12 0.09% 124.60 126.00 1.40 396625 <1 0.026 0.01 0.01 0.02 0.05% 126.00 127.50 1.50 396626 1.00 0.030 0.12 0.02 0.21 0.22% 127.50 128.60 1.10 396627 1.00 0.011 0.01 0.00 0.02 0.04% 128.60 129.80 1.20 396628 29.00 0.538 0.70 1.14 3.71 2.89% 129.80 131.00 1.20 396629 1.00 0.032 0.09 0.06 0.41 0.26% Shaded rows are the peak sample for each mineral. Copper Equivalent (Cu-Eq) combines all five metals into one comparable grade, calculated using August 26, 2026, Kitco pricing: US$6.52/lb. Cu, US$0.85/lb. Pb, US$1.84/lb. Zn, US$67.77/oz Ag, US$4,591.50/oz Au, with a uniform 95% metallurgical recovery assumed for all metals; since it is unclear which metals will be the principal products, assuming differing recoveries by metal is premature at this stage. Copper equivalent grades are for comparative purposes only and do not represent recoverable metal. “Largest Value Contributor” is the metal contributing the greatest share of in-situ gross value over the interval at the metal prices as set out above. FIGURE 2: Sample #396617 (25 g/t Ag, 0.716 g/t Au, 0.60% Cu, 1.40% Pb, 10.55% Zn) 4.88% Cu-Eq Patrick J. Cruickshank, MBA, CEO & Director, stated, “WD-26-15 delivered another high-grade intersection, with an outstanding 9.19% Zn over 3.00m with strong silver and gold returns. Every hole contributes to the overall deposit picture and this hole demonstrates the dynamic characteristics to this outstanding high grade deposit. All six holes reported to date have intersected very strong VMS mineralization, including WD-26-14 at 5.09% Cu-Eq over 14.15m, the highest grade of the program to date. With our 6th hole now reported, and approximately 11 additional holes to report from the 1st half of this important 10,000m program, we have an exciting results season still in front of us. Once our BHEM Team completes their survey and we initiate our 2nd half phase of this drill program, we will then test the important west flank area of the deposit and test the depth of this environment , where we continue to discover higher grade mineralization the deeper we drill. We look forward to the 2nd 5000m phase of this program.” FIGURE 3: Sample #396619 (32 g/t Ag, 0.592 g/t Au, 1.17% Cu, 2.03% Pb, 8.96% Zn) 5.06% Cu-Eq FIGURE 4: Sample #396618 (27 g/t Ag, 0.695 g/t Au, 0.79% Cu, 1.59% Pb, 8.07% Zn) 4.40% Cu-Eq FIGURE 5: Location of DDH WD-26-15 Strategic Land Claims Acquisition Nine Mile Metals has acquired (2) very strategic project blocks at its Nine Mile Brook Project. Nine Mile has acquired “Nine Mile Brook East – CB# 12635 ” and “Muddy Lake South – CB# 12636”. (See Figure 6). Nine Mile Brook East consists of 39 claims (8.52 km2) and lies along the east border of the main Nine Mile Brook claims block covering a large package of Boucher Brook sediments and lesser mafic volcanics. Immediately north of the Nine Mile Brook lens is the Boucher Brook mineral occurrence where Pb-Zn mineralization occurs where the sediments are in contact with felsic volcanics of the California Lake Group. Muddy Lake South is located along the southern boundary of the Nine Mile Brook Project, the 27 claims (5.9km2) covering both Boucher Brook sediments and felsic volcanics of
Nine Mile Metals DDH WD-26-10 Intersects High Grade VMS Zone Including 31.95m of 2.52% Cu-Eq and 14.15m of 3.73% Cu-Eq
Also Including: 2.87% Cu-Eq over 27.25m and 4.15m of 5.16% Cu-Eq Toronto, Ontario–(Newsfile Corp. – August 27, 2026) – Nine Mile Metals Ltd. (CSE: NINE) (OTCID: VMSXF) (FSE: KQ9) (the “Company” or “Nine Mile”) is pleased to announce assay results for DDH WD-26-10, at the Wedge Mine in the Bathurst Mining Camp, New Brunswick. To view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/7335/311792_74151ae474979a03_002full.jpg DDH WD-26-10 was collared in the southwest, at the edge of our drill pattern (oriented at 340°, angled -65° below horizontal), to a depth of 224 meters and successfully intersected a 31.95m high grade VMS Zone consisting of a sulphide lens carrying copper, lead, zinc, silver and gold, with assays increasing with depth. The intersection assayed 2.52% Cu-Eq over 31.95m including 27.25m of 2.87% Cu-Eq and 14.15m of 3.73% Cu-Eq with 4.15m of 5.16% Cu-Eq. The drill core consisted of massive pyritic VMS with locally visible chalcopyrite, sphalerite and galena. Host rocks included both felsic volcanics and sediments. In the upper portion of the lens, copper is dominant with assay results showing Ag, Au, Pb and Zn increasing at depth. The intervals are of true width. To view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/7335/311792_ninemile_image.jpg TABLE 1: KEY INTERSECTIONS (WEIGHTED AVERAGE GRADE OVER EACH ZONE) Lens Zone From(m) To(m) Width(m) Silver(g/t) Gold(g/t) Copper(%) Lead(%) Zinc(%) Copper-Eq. (%) Massive Sulphide Zone 109.00 140.95 31.95 24.89 0.49 0.93 0.57 2.23 2.52 Including 123.00 137.15 14.15 38.94 0.68 0.98 1.14 4.67 3.73 And including 133.00 137.15 4.15 45.80 0.92 1.46 1.42 6.64 5.16 Gary Lohman, P.Geo., VP Exploration, Director stated, “Drilling continues to expand the mineralized footprint in the southwest. As with DDH WD-26-07, we see a variation in the distribution of the mineralization, with this hole highlighting increased assay values for Ag, Au, Pb and Zn at depth, further demonstrating the multi-element value of the Wedge.” TABLE 2 · DDH WD-26-10 CERTIFIED ASSAYS – (SAMPLE BY SAMPLE) From(m) To(m) Width(m) Sample # Silver(g/t) Gold(g/t) Copper(%) Lead(%) Zinc(%) Copper-Eq. (%) 106.50 108.00 1.50 396469 1 0.01 0.01 0.01 0.05 0.05 108.00 109.00 1.00 396470 <1 0.01 0.01 0.00 0.01 0.02 109.00 109.90 0.90 396471 5 0.06 0.28 0.01 0.02 0.43 109.90 111.00 1.10 396472 25 0.33 1.65 0.08 0.06 2.39 111.00 112.00 1.00 396473 21 0.32 2.04 0.09 0.05 2.72 112.00 113.00 1.00 396474 23 0.26 1.51 0.10 0.04 2.14 113.00 114.00 1.00 396475 20 0.30 1.49 0.12 0.06 2.14 114.00 115.00 1.00 396476 17 0.43 1.27 0.11 0.05 1.99 115.00 116.00 1.00 396477 14 0.50 0.84 0.13 0.06 1.61 116.00 117.00 1.00 396478 13 0.50 0.72 0.18 0.07 1.48 117.00 118.00 1.00 396479 13 0.45 0.68 0.10 0.07 1.37 118.00 119.00 1.00 396481 10 0.51 0.83 0.09 0.09 1.55 119.00 120.00 1.00 396482 18 0.50 0.99 0.09 0.07 1.81 120.00 121.00 1.00 396483 28 0.60 1.10 0.09 0.15 2.20 121.00 122.00 1.00 396484 11 0.57 1.01 0.17 0.14 1.82 122.00 123.00 1.00 396485 14 0.58 1.00 0.29 0.46 1.98 123.00 124.00 1.00 396486 41 0.63 1.65 1.18 0.35 3.17 124.00 125.00 1.00 396487 52 0.61 1.93 0.86 1.27 3.81 125.00 126.00 1.00 396488 49 0.74 1.21 1.36 3.64 3.92 126.00 127.00 1.00 396489 70 0.85 0.89 2.12 8.94 5.62 127.00 128.00 1.00 396490 26 0.43 0.31 1.38 6.28 3.10 128.00 129.00 1.00 396491 20 0.37 0.35 0.60 3.60 2.13 129.00 130.00 1.00 396492 25 0.45 0.40 0.57 3.50 2.31 130.00 131.00 1.00 396493 32 0.57 0.33 1.09 3.35 2.49 131.00 132.00 1.00 396494 22 0.55 0.43 0.46 2.70 2.15 132.00 133.00 1.00 396495 24 0.54 0.35 0.61 4.90 2.73 133.00 134.00 1.00 396496 36 0.74 0.62 2.11 3.98 3.33 134.00 135.00 1.00 396497 36 0.98 0.41 1.42 9.19 4.74 135.00 136.00 1.00 396498 41 0.96 2.30 0.94 4.32 5.26 136.00 137.15 1.15 396499 67 0.98 2.37 1.26 8.76 7.04 137.15 138.00 0.85 396501 5 0.11 0.05 0.35 1.51 0.72 138.00 139.00 1.00 396502 4 0.05 0.05 0.14 2.12 0.78 139.00 140.00 1.00 396503 1 0.02 0.02 0.03 0.21 0.12 140.00 140.95 0.95 396504 1 0.02 0.26 0.01 0.04 0.31 140.95 141.60 0.65 396505 <1 0.01 0.06 0.00 0.07 0.09 Shaded rows are the peak sample for each mineral. Copper Equivalent (Cu-Eq) combines all five metals into one comparable grade, calculated using August 26, 2026, Kitco pricing: US$6.52/lb. Cu, US$0.85/lb. Pb, US$1.84/lb. Zn, US$67.77/oz Ag, US$4,591.50 /oz Au, with a uniform 95% metallurgical recovery assumed for all metals; since it is unclear which metals will be the principal products, assuming differing recoveries by metal is premature at this stage. Copper equivalent grades are for comparative purposes only and do not represent recoverable metal. “Largest Value Contributor” is the metal contributing the greatest share of in-situ gross value over the interval at the metal prices as set out above. Figure 2: Sample #396497 (36 g/t Ag, 0.98 g/t Au, 0.41% Cu, 1.42% Pb, 9.19% Zn) 4.74% Cu-Eq To view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/7335/311792_74151ae474979a03_004full.jpg Patrick J Cruickshank, MBA, CEO & Director stated “this drill hole continues to demonstrate the deposit’s economic viability. I am very pleased to see that this hole is very strong in Silver and Zinc. The hole also gets stronger at depth, and the Lens becomes more characteristic of the VMS Model. Another very successful hole on our drill pattern to move towards a new 43-101 and a MRE. Mike Dufresne and our Technical Team continue to enhance the 3D Model of the deposit and uncover its hidden value. We look forward to our next update and release of other drill results.” Figure 3: Sample #396498 (41 g/t Ag, 0.96 g/t Au, 2.30% Cu, 0.94% Pb, 4.32% Zn) 5.26% Cu-Eq To view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/7335/311792_74151ae474979a03_005full.jpg Figure 4: Apex Geoscience Cross Section – DDH WD-26-10 To view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/7335/311792_74151ae474979a03_006full.jpg Analysis, QAQC and Qualified Person All samples were submitted to ALS Global in Moncton, an independent commercial laboratory, for preparation and assaying (ME-ICP61a
NINE MILE METALS ANNOUNCES CERTIFIED ASSAYS OF 3.49% CU-EQ OVER 24.55 METERS (TRUE WIDTH) IN DDH WD-26-09
Including 4.03% Cu-Eq over 16.50m and 5.22% Cu-Eq over 6.50m Toronto, Ontario–(Newsfile Corp. – August 12, 2026) – Nine Mile Metals Ltd. (CSE: NINE) (OTCID: VMSXF) (FSE: KQ9) (the “Company” or “Nine Mile”) is pleased to announce certified assay results for DDH WD-26-09, at the Wedge Mine in the Bathurst Mining Camp, New Brunswick. 3.49% Cu-Eq.over 24.55mIncluding 4.03% Cu-Eqover 16.50m 5.22% Cu-Eq.over 6.50mBest high-grade intercept114.00 – 120.50m 31.72 g/t Silverover 21.75m1.02 oz Silver zoneincl. 41.00 g/t over 13.00m 0.67 g/t Goldover 20.20mGold zone including0.87 g/t over 11.00m 2.02% Zincover 22.50mincl. 4.82% over 5.75m8.09% over 3.00m · peak 11.40% WD-26-09 was collared in the southwest at the edge of our drill pattern (oriented at 340°, angled 50° below horizontal, to a depth of 200 meters) and successfully intersected a high-grade VMS Lens. We intersected a thick massive sulphide lens carrying copper, lead, zinc, silver and gold, with visible chalcopyrite and bornite in the core. Within the broader zone, a 16.50m section averaged 4.03% Cu-Eq, and a 6.50m zone returned 5.22% Cu-Eq. A Silver Zone of 21.75m returned 31.72 g/t Ag (1.02 oz/t Ag), with the peak sample reaching 58 g/t Silver. A Gold Zone of 20.20m returned 0.67 g/t Au including 11.00 m of 0.87 g/t Au. Zinc averaged 2.02% over 22.50m, including 4.82% over 5.75m and 8.09% over 3.00m, with a peak sample of 11.40% Zinc. All intersections are a true width. Figure 1 · Bornite copper samples #396431 (left) and #396432 (right) To view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/7335/309300_80f0898a14ba08fd_002full.jpg Gary Lohman, P.Geo., VP Exploration, Director stated, “Definitely nice to return to the VMS section previously identified in the southwest. Drilled at a steeper angle than previous holes in the vicinity, this assists in expanding the deposit footprint. In addition to Cu, the assays also indicate substantial Au and Ag present in this portion of the system. Intersecting five payable metals over this width and seeing copper strengthen toward the base of the zone is exactly what we want to see at this stage. Additional drill holes are planned for this western portion of the Wedge, where we believe there is meaningful room to expand the deposit.” TABLE 1 DDH WD-26-09 CERTIFIED ASSAYS (SAMPLE BY SAMPLE) FROM(M) TO(M) WIDTH(M) SAMPLE # SILVER(G/T) GOLD(G/T) COPPER(%) LEAD(%) ZINC(%) CU-EQ(%) 93.30 94.80 1.50 396421 1 0.02 0.01 0.00 0.02 0.05 94.80 95.80 1.00 396422 1 0.03 0.02 0.01 0.12 0.10 95.80 96.80 1.00 396423 2 0.04 0.05 0.01 0.07 0.14 96.80 98.00 1.20 396424 8 0.35 1.75 0.09 0.09 2.24 98.00 99.00 1.00 396425 12 0.33 1.38 0.26 0.66 2.08 99.00 100.00 1.00 396426 15 0.39 2.64 0.28 1.01 3.53 100.00 101.00 1.00 396427 19 0.35 2.29 0.12 0.22 2.98 101.00 102.00 1.00 396428 18 0.44 1.81 0.52 1.09 2.84 102.00 103.00 1.00 396429 14 0.50 1.31 0.21 0.30 2.10 103.00 104.00 1.00 396430 16 0.50 1.03 0.22 0.54 1.92 104.00 105.00 1.00 396431 33 0.53 1.98 0.56 0.33 3.13 105.00 106.00 1.00 396432 41 0.70 1.76 1.32 1.69 3.64 106.00 107.00 1.00 396433 43 0.79 1.17 1.47 0.66 2.91 107.00 108.00 1.00 396434 39 0.77 1.02 1.52 2.64 3.21 108.00 109.00 1.00 396435 49 0.79 1.35 2.83 3.21 4.02 109.00 110.00 1.00 396436 42 0.91 1.53 1.17 2.57 3.84 110.00 111.00 1.00 396437 34 0.78 1.48 1.20 0.21 2.93 111.00 112.00 1.00 396438 22 0.78 1.01 0.47 0.19 2.20 112.00 113.00 1.00 396439 32 0.87 1.09 1.23 0.56 2.70 113.00 114.00 1.00 396441 58 0.97 1.58 3.07 1.12 4.04 114.00 115.00 1.00 396442 52 1.09 0.95 4.99 6.39 5.05 115.00 116.00 1.00 396443 47 1.08 1.10 2.68 11.40 6.14 116.00 117.00 1.00 396444 41 0.61 1.69 2.60 6.47 4.88 117.00 118.00 1.00 396445 14 0.17 3.09 0.15 0.90 3.71 118.00 119.00 1.00 396446 28 0.15 4.20 0.45 1.57 5.21 119.00 119.75 0.75 396447 28 0.13 5.09 0.98 1.34 6.09 119.75 120.50 0.75 396448 6 0.13 5.39 0.10 0.84 5.83 120.50 121.35 0.85 396449 5 0.07 1.06 0.20 0.22 1.29 121.35 122.20 0.85 396450 <1 0.01 0.06 0.00 0.06 0.09 122.20 123.20 1.00 396451 <1 <0.005 0.11 0.00 0.15 0.15 123.20 124.70 1.50 396452 1 0.01 0.08 0.00 0.05 0.12 Shaded rows are the peak sample for each metal. Copper Equivalent (CuEq) combines all five metals into one comparable grade, calculated using August 11, 2026, Bloomberg pricing: US$6.63/lb Cu, US$0.84/lb Pb, US$1.72/lb Zn, US$65.10/oz Ag, US$4,443.90/oz Au, with a uniform 95% metallurgical recovery assumed for all metals; since it is unclear which metals will be the principal products, assuming differing recoveries by metal is premature at this stage. Patrick J Cruickshank, MBA, CEO & Director stated, “This was a very strong polymetallic VMS Hole, with a large Lens Zone. As you can see in the itemized Sample Results Table, there is multiple high grade Copper, Silver and Gold zones, confirming a multi-dimensional deposit at the Wedge. Each one of these mineral intercepts would be a success on their own accord, but to combine them all in one hole shows the strength of this Lens and is spectacular start to our results season. These results will be included in our Live 3D Modelling headed by Mike Dufresne, President of Apex Geoscience & our Technical Team to move towards an updated 43-101 and an MRE objective. We are extremely pleased by these results and look forward to releasing our next set of results from ALS Global in Moncton. Unfortunately, we have no control over the order of our results coming back from the Labs.” Figure 2 · Apex Geoscience Cross Section – DDH WD-26-09 To view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/7335/309300_80f0898a14ba08fd_003full.jpg TABLE 2: KEY INTERSECTIONS (WEIGHTED AVERAGE GRADE OVER EACH INTERVAL) FROM(M) TO(M) WIDTH(M) SILVER(G/T) GOLD(G/T) COPPER(%) LEAD(%) ZINC(%) COPPER-EQ. (%) Massive Sulphide Zone 96.80 121.35 24.55 28.85 0.58 1.89 1.16 1.86 3.49 Including 104.00 120.50 16.50 36.39 0.68 1.99 1.61 2.52 4.03 And including 114.00 120.50 6.50 31.92 0.51 2.91 1.80 4.36 5.22 Figure 3 · Apex Geoscience Cross Section – DDH WD-26-09 (incl. WD-25-02,
NINE MILE METALS ANNOUNCES DRILL RIG MOBILIZATION FOR THE WEDGE 10,000M DRILL PROGRAM AND TARGETS NEW HIGH GRADE COPPER ZONE
Toronto, Ontario–(Newsfile Corp. – May 19, 2026) – NINE MILE METALS LTD. (CSE: NINE) (OTC Pink: VMSXF) (FSE: KQ9) (the “Company” or “Nine Mile“), is pleased to announce that Orbit Garant will mobilize a YS2000 Skid Mounted Drill Rig for the upcoming Wedge 10,000m drill program next week. The drill rig is being prepped in Moncton, New Brunswick and is anticipated to arrive onsite May 28th. The Drill Program will commence at the Wedge Mine for Phase 3 Drilling, then continue to The TriBag and West Wedge Targets, (Targets #3 and #4 – Figure 1 below). We have the drill rig committed for the entire season through December. Last fall’s highly successful drill program concentrated on the southwest extension of the Wedge Mine, successfully uncovering new high-grade Copper-Gold-Silver lenses of the deposit. On the heels of the successful eastern expansion of the deposit, Phase 2 expanded the footprint of the deposit, supporting our geophysical technology, new interpretation, and modelling. This Phase 3 drill program focuses specifically on these newly discovered high-grade zones and will target the western flank of the deposit from the other side of the fault zone where we lost water last year as we entered a high-grade copper zone on drill hole WD-25-2B within Target #2, (Figure 1), the results summarized on (Table 1). We will also target the mine at depth. Apex Geoscience, Mike Dufresne, P.Geo. & Technical Advisor, and team will be onsite June 1st for a complete site visit on all 4 projects, including Nine Mile Brook, a priority for the fall of 2026. FIGURE #1: Western Portfolio VMS Trend Targets (Wedge Trend Drill Program) To view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/7335/297940_7bcc0a0ff48d4953_002full.jpg TABLE 1: WD-25-02B Overall ALS Global Lab Certified Assay Summary (Weighted Averages)* From To Width Cu Pb Zn Au Ag Cu Eq (m.) (m.) (m.) % % % g/t g/t % Upper Zone 56.00 62.00 6.00 0.80 1.48 2.66 0.45 45.50 3.20 Lower Zone Overall 107.00 122.00 15.00 2.36 0.35 1.29 0.21 7.47 3.17 including 115.16 122.00 6.84 4.47 0.75 2.58 0.34 14.50 5.99 * As reported in previous press release April 2, 2026 Gary Lohman, VP Exploration, Director stated, “We are looking forward to testing both the western extension and the depth of the deposit with drill holes designed by Mike Dufresne and the geophysical team at Apex Geoscience. With previous mining and exploration limited to the upper portions of the deposit, this series of drill holes will expand the mineralized footprint, as we accomplished in the east, adding to the resource. All drill holes will be capped on completion to facilitate downhole geophysics (BHEM) or revisit to extend the holes, which , along with the cross-section drill results, assists in resource 3D modeling and future exploration planning. We look forward to sharing our first results.” Figure 2: Orbit Garant Drilling is ECOLOGO accredited. Recognized for their Mineral Exploration Services Certified for Responsible Environmental and Social Best Practices. To view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/7335/297940_7bcc0a0ff48d4953_003full.jpg Headquartered in Val-d’Or, Quebec, Orbit Garant Drilling is one of Canada’s largest drilling companies providing both underground and surface drilling services in Canada and internationally. With more than 200+ drill rigs and over 1000 specialized employees, Orbit Garant offers drilling services to major, intermediate and junior mining companies at every stage of mine exploration, development and production. Figure 3: Wedge 2026 Drill Target Area with previous Drill Hole Locations To view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/7335/297940_7bcc0a0ff48d4953_004full.jpg Patrick J. Cruickshank, MBA, CEO & Director stated “We are thrilled to receive clearance from the NB Government to get heavy equipment on the BMC roads and mobilize the drill rigs to the Wedge. Our priority will be to test the deposit from the western side targeting the “New” High-Grade Cu – Ag – Au Lens identified in last fall’s drill program. As previously stated, we will be able to drill the new lens from the other side of the fault that caused us to lose the water in the drill hole, just as we entered the High-Grade Copper Lens in Hole WD-25-2b. We will also test the depth of the deposit. We are pleased to have Mike Dufresne and entire Technical Team all on site for a complete portfolio site visit and analysis for the basis for an updated 43-101 on the Wedge Project and review of the Nine Mile Brook Project to determine new drill targets at the Lens. We look forward to updates from the drill site.” About Nine Mile Metals Ltd.: Nine Mile Metals Ltd. is a Canadian public critical mineral exploration company focused on VMS (Cu, Pb, Zn, Ag and Au) exploration in the world-famous Bathurst Mining Camp, New Brunswick, Canada. The Company’s primary business objective is to explore its four VMS Projects: Wedge VMS Project, Nine Mile Brook VMS Project, California Lake VMS Project, and the Canoe Landing Lake (East – West) VMS Project. The Company is focused on Critical Minerals Exploration (CME), positioning for the boom in EV and green technologies requiring Copper, Silver, Lead and Zinc with a hedge with Gold. Social Media X: @NineMileMetalsLinkedIn: Nine Mile MetalsFacebook: @ Nine Mile Metals ON BEHALF OF NINE MILE METALS LTD. Jonathan Holmes,President & DirectorT: +1.506-804-6117E: jonathan@ninemilemetals.com This press release may include forward-looking information within the meaning of Canadian securities legislation, concerning the business of Nine Mile. Forward-looking information is based on certain key expectations and assumptions made by the management of Nine Mile. In some cases, you can identify forward-looking statements by the use of words such as “will,” “may,” “would,” “expect,” “intend,” “plan,” “seek,” “anticipate,” “believe,” “estimate,” “predict,” “potential,” “continue,” “likely,” “could” and variations of these terms and similar expressions, or the negative of these terms or similar expressions. . Forward-looking statements in this press release include that (a)
NINE MILE METALS ANNOUNCES A SUMMARY OF THE FALL 2025 DRILL PROGRAM AT THE WEDGE MINE AND ANNOUNCES A 10,000M SPRING DRILL PROGRAM
Toronto, Ontario–(Newsfile Corp. – May 5, 2026) – NINE MILE METALS LTD. (CSE: NINE) (OTC Pink: VMSXF) (FSE: KQ9) (the “Company” or “Nine Mile“), is pleased to provide a summary of the Fall 2025 drill program, the certified results for drill holes WD-25-04 and WD-25-05 and announcing a 10,000m Drill Program update for the Wedge Mine and Tribag – West Wedge Targets, including Target #6 at California Lake East, situated in the renowned Bathurst Mining Camp, New Brunswick (BMC). Table 1: Assay Summary, Drill Holes WD-25-01, WD-25-02, WD-25-2B, WD-W5-04 and WD-25-05 WD-25-01 From To Width Ag Au Cu Pb Zn Cu Eq (m.) (m.) (m.) g/t g/t % % % % Overall 156.05 178.70 22.65 39.52 0.96 0.99 2.25 1.61 3.83* Includes 161.05 178.70 17.65 42.50 1.01 1.20 2.62 2.05 4.33* 160.05 173.05 13.00 50.33 1.21 0.39 3.23 2.45 4.14* WD-25-02 Overall 138.72 170.82 32.10 14.09 0.35 1.53 0.47 1.81 2.78* Horizon 1 138.72 141.22 2.50 61.57 1.01 3.09 1.02 4.88 6.95* Horizon 2 150.30 165.32 15.02 11.00 0.40 2.14 0.52 1.00 3.19* Includes 159.30 170.82 11.52 17.00 0.43 3.20 0.48 2.48 4.78* 159.30 165.32 6.02 12.50 0.42 4.63 0.27 0.79 5.64* Horizon 3 168.00 170.82 2.82 36.65 0.72 2.91 0.96 7.13 6.49* WD-25-2B Upper Zone 56.00 62.00 6.00 45.50 0.45 0.80 1.48 2.66 3.20* Lower Zone 107.00 122.00 15.00 7.47 0.21 2.36 0.35 1.29 3.17* Includes 115.16 122.00 6.84 14.50 0.34 4.47 0.75 2.58 5.99* WD-25-04 Upper Zone 158.35 165.75 7.40 5.60 0.15 0.51 0.02 0.07 0.81 Lower Zone 184.75 198.75 14.00 1.50 0.08 1.11 0.06 0.04 1.25 Includes 184.75 194.75 10.00 1.70 0.09 1.35 0.08 0.04 1.51 WD-25-05 Overall 155.52 164.80 9.28 11.07 0.12 1.28 0.13 0.18 1.69 Includes 155.52 161.80 6.28 15.89 0.16 1.78 0.19 0.24 2.35 Lower Zone 187.80 192.80 5.00 1.20 0.07 0.51 0.04 0.01 0.62 * As reported in previous press releases.Copper Equivalent (Cu-Eq) intervals in WD-25-04 and WD-25-05 were calculated based on May 1, 2026, Kitco pricing. Figure 1: Plan View, Phase 1 and Phase 2 Drilling, BHEM Collars To view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/7335/295910_5be5b4229483fbbc_002full.jpg Drill Holes WD-25-04 and WD-25-05 Figure 2: Cross Section, Drill Holes WD-25-01, WD-25-04 and WD-25-05, Geology, Cu and Zn assays. To view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/7335/295910_5be5b4229483fbbc_003full.jpg Figure 3: Drill Holes WD-25-02B, WD-25-02 and WD-25-05, Geology, Cu and Zn assays. To view an enhanced version of this graphic, please visit:https://images.newsfilecorp.com/files/7335/295910_5be5b4229483fbbc_004full.jpg Gary Lohman, P.Geo, VP Exploration, Director stated, “The Wedge Mine Southwest Phase 2 drill program was highly successful, intersecting copper mineralization in all drill holes and discovered a new High-Grade Copper Zone. It also intersected substantial Au & Ag zones. When drilling a deposit, all holes are important due to the distribution and variation of mineralization within the system. Each drillhole tells a piece of the puzzle and paints the deposit picture. The success of this drill program has enabled our Technical Team to 3D model all Drill holes that intersected in the previous Wedge Eastern Extension new zone, the newly completed Southwest Zones and all the historical Cominco Drill data, into a living 3D model. This helps define the remaining deposit area and forecast the new drill areas to target the new Copper Rich Lens and the entire western extension of the deposit. We have received all necessary drill permits and target definition. The BHEM surveys will be the 1st 2 holes address in this next Drill Program slated for 1st week of June.” Patrick J. Cruickshank, MBA, CEO & Director, stated, “We are looking forward to announcing our 10,000-meter drill Wprogram at the Wedge Mine, Tribag and West Wedge, including Target #6 at California Lake East. Due to the late snowfall this past spring, the government has extended the heavy equipment ban on the BMC roads until the last week of May. The permits are in hand, targets defined, and Rigs ordered and committed. This year will be a very busy drill season for us at Nine Mile Metals.” Analysis and QAQC All samples were submitted to and analyzed at ALS Canada Ltd. (ALS), an independent commercial laboratory for both the sample preparation and assaying. ALS is a commercial laboratory independent of Nine Mile Metals Ltd. Samples submitted through ALS are run through standard preparation methods and analysed using Code ME-ICP61A which is a high-grade four acid digestion and ICP+AES analysis. Gold analysis is done by standard fire assay (Au-AA23) using a 30-gram sample. Overlimit assays are done by gravimetric analysis (Au-GRA21). ALS undertakes their own QA/AC protocols including coarse and pulp duplicate analysis to ensure proper sample preparation and equipment calibration. Nine Mile’s QAQC program includes regular insertion of CRM standards, duplicates, and blanks into the sample stream with a stringent review of all results. QAQC and data validation was performed, and no material errors were observed. Copper Equivalent (Cu-Eq) for hole samples in WD-25-04 and WD-25-05 were calculated based on May 1, 2026, pricing: US$ 5.86/lb Cu, US$ 0.88.00/lb Pb, US$ 1.51/lb Zn, US$ 75.22/oz Ag, and US$ 4,,613.40/oz Au, with 80% metallurgical recoveries assumed for all metals. Since it is unclear which metals will be the principal products, assuming different recoveries is premature at this stage. Therefore, an 80% recovery rate is justified. The disclosure of technical information in this news release has been prepared in accordance with Canadian regulatory requirements as set out in National Instrument 43-101 – Standards of Disclosure for Mineral Projects (“NI 43-101”) and reviewed and approved by Gary Lohman, B.Sc., PGO., VP Exploration and Director who acts as the Company’s Qualified Person, and is not independent of the Company. About Nine Mile Metals Ltd.: Nine Mile Metals Ltd. is a Canadian public mineral exploration company focused on VMS (Cu, Pb, Zn, Ag and Au) exploration in the world-famous Bathurst Mining Camp, New Brunswick, Canada. The Company’s primary business objective is to explore its four VMS Projects: Wedge VMS Project, Nine Mile Brook VMS Project, California Lake VMS Project, and the Canoe Landing Lake (East – West) VMS Project. The Company