CSE: NINE  |  OTCQB: VMSXF  |  FSE: KQ9
X-twitter Instagram Linkedin Youtube
New Presentation
News Alerts

NINE MILE METALS DDH WD-26-18 INTERSECTS A HIGH GRADE VMS LENS, RETURNING 7.13% CU-EQ OVER 11.65 M INCLUDING 9.93% CU-EQ OVER 6.70 M AND 10.46% CU-EQ OVER 4.80 M, WITH AN ADDITIONAL UPPER 31.50M COPPER STRINGER ZONE

Zone 1…(1.38 g/t Ag, 0.04 g/t Au, 0.30% Cu, 0.01% Pb and 0.10% Zn) over 31.50 m, 68.50 to 100.00m (0.40% Cu-Eq)Zone 2… (78.79 g/t Ag, 1.40 g/t Au, 3.23% Cu, 1.43% Pb and 3.80% Zn) over 11.65 m, 130.70 to 142.35m (7.13% Cu-Eq) TORONTO, ONTARIO – October 21st, 2026 – Nine Mile Metals Ltd. (CSE: NINE | OTCQB: VMSXF | FSE: KQ9) (the “Company” or “Nine Mile”) is pleased to announce assay results for DDH WD-26-18 at the Wedge VMS Project in the Bathurst Mining Camp, New Brunswick. DDH WD-26-18 was collared along the northeast edge of our drill pattern, (oriented at 145°, angled -50° below horizontal), to a depth of 302 meters. Collared in felsic volcanics, sulphide mineralogy was first intersected between 44.6 and 47.0 meters with pyrite and minor chalcopyrite continuing to 128.1 meters followed by a 2.6-meter transition consisting of 15 – 20% pyrite in a soft, black chloritic matrix followed by very fine grained to cherty felsic volcanics. Between 130.7 and 142.35 fine grained, pyritic massive sulphide was intersected characterized by pyrite, chalcopyrite, local sphalerite and galena bands in addition to minor bornite / covellite along fractures. At the base of the section, interbedded graphitic sediments and mafic volcanics continue to the end of the drill hole. The intersections reported are of true widths. Gary Lohman, P.Geo., VP Exploration and Director, stated, “As we drilled from the north along the eastern edge of the drill pattern, we continue to extend the footprint of the mineralization previously intersected in drill holes WD-24-02, WD-24-04, WD-24-05, WD-24-06 and WD-24-07. WD-26-18 best demonstrates the very high grade, multi-element nature of this deposit. We have some outstanding traditional VMS mineralization. The 11.65m massive sulphide intersection averaged 7.13% Cu-Eq, with a 6.70m core of 9.93% Cu-Eq in which every sample exceeded 8.4% Cu-Eq, carrying 71 to 136 g/t silver and 1.16 to 2.40 g/t gold. Silver and gold together account for roughly a third of the in situ value, so the Cu-Eq calculation benefits from both the base and precious metals in the VMS horizon. The 31.50m of copper stringer mineralization above the lens is also encouraging, as stringer zones of this type typically sit close to the feeder system of a VMS deposit. With BHEM surveying scheduled, follow-up drilling will test the extent of this lens along strike and at depth.” FIGURE 1: Sample #396690 (101 g/t Ag, 2.17 g/t Au, 6.83% Cu, 0.36% Pb, 0.35% Zn)  10.74% Cu-EqBornite & Covellite TABLE 1 · DDH WD-26-18 CERTIFIED ASSAYS – (SAMPLE BY SAMPLE) From (m) To (m) Width (m) Sample # Silver (g/t) Gold (g/t) Copper (%) Lead (%) Zinc (%) Copper- Eq. (%) 25.80 27.30 1.50 396630 1 0.03 0.05 0.01 0.05 0.11% 27.30 28.80 1.50 396631 1 0.02 0.04 0.00 0.03 0.08% 28.80 30.20 1.40 396632 <1 0.01 0.00 0.00 0.03 0.03% 30.20 31.50 1.30 396633 1 0.02 0.04 0.00 0.04 0.09% 31.50 34.60 3.10 N/S             34.60 36.10 1.50 396634 <1 0.02 0.00 0.00 0.03 0.03% 36.10 37.60 1.50 396635 1 0.02 0.02 0.00 0.03 0.07% 37.60 44.60 7.00 N/S             44.60 45.60 1.00 396636 2 0.06 0.32 0.00 0.06 0.44% 45.60 47.00 1.40 396637 1 0.04 0.03 0.01 0.16 0.13% 47.00 48.00 1.00 396638 1 0.04 0.03 0.00 0.10 0.12% 48.00 49.00 1.00 396639 <1 0.03 0.08 0.00 0.04 0.13% 49.00 68.50 19.50 N/S             68.50 70.00 1.50 396641 1 0.03 0.19 0.00 0.02 0.25% 70.00 71.50 1.50 396642 1 0.03 0.22 0.00 0.06 0.28% 71.50 73.00 1.50 396643 1 0.02 0.19 0.00 0.19 0.29% 73.00 74.50 1.50 396644 2 0.05 0.59 0.00 0.16 0.72% 74.50 76.00 1.50 396645 1 0.05 0.41 0.00 0.07 0.50% 76.00 77.50 1.50 396646 1 0.03 0.33 0.00 0.09 0.40% 77.50 79.00 1.50 396647 1 0.03 0.43 0.00 0.18 0.52% 79.00 80.50 1.50 396648 1 0.02 0.40 0.00 0.15 0.48% 80.50 82.00 1.50 396649 1 0.03 0.13 0.00 0.04 0.19% 82.00 83.50 1.50 396650 1 0.03 0.22 0.00 0.10 0.29% 83.50 85.00 1.50 396651 2 0.04 0.53 0.02 0.24 0.67% 85.00 86.50 1.50 396652 1 0.03 0.14 0.00 0.07 0.20% 86.50 88.00 1.50 396653 1 0.04 0.08 0.00 0.05 0.15% 88.00 89.50 1.50 396654 2 0.04 0.43 0.01 0.15 0.55% 89.50 91.00 1.50 396655 1 0.02 0.12 0.01 0.07 0.18% 91.00 92.50 1.50 396656 <1 0.02 0.05 0.00 0.03 0.09% 92.50 94.00 1.50 396657 1 0.05 0.39 0.03 0.17 0.51% 94.00 95.50 1.50 396658 <1 0.04 0.02 0.01 0.01 0.07% 95.50 97.00 1.50 396659 2 0.09 0.27 0.03 0.07 0.42% 97.00 98.50 1.50 396661 4 0.12 0.57 0.10 0.07 0.78% 98.50 100.00 1.50 396662 3 0.08 0.63 0.05 0.06 0.78% 100.00 101.50 1.50 396663 1 0.04 0.09 0.01 0.02 0.15% 101.50 103.00 1.50 396664 1 0.04 0.03 0.00 0.01 0.08% 103.00 104.50 1.50 396665 1 0.02 0.01 0.00 0.01 0.05% 104.50 106.00 1.50 396666 1 0.05 0.01 0.02 0.01 0.08% 106.00 107.50 1.50 396667 1 0.04 0.12 0.02 0.02 0.18% 107.50 109.00 1.50 396668 2 0.10 0.22 0.04 0.04 0.37% 109.00 110.50 1.50 396669 1 0.02 0.02 0.01 0.01 0.06% 110.50 112.00 1.50 396670 1 0.05 0.03 0.02 0.02 0.10% 112.00 113.50 1.50 396671 1 0.07 0.04 0.02 0.03 0.14% 113.50 115.00 1.50 396672 1 0.06 0.10 0.01 0.03 0.19% 115.00 116.50 1.50 396673 1 0.03 0.13 0.01 0.02 0.18% 116.50 118.00 1.50 396674 1 0.08 0.09 0.01 0.03 0.19% 118.00 119.50 1.50 396675 <1 0.01 0.00 0.00 0.02 0.03% 119.50 121.00 1.50 396676 1 0.03 0.00 0.01 0.03 0.06% 121.00 122.50 1.50 396677 <1 0.02 0.00 0.00 0.02 0.03% 122.50 124.00 1.50 396678 <1 0.01 0.00 0.00 0.01 0.02% 124.00 125.50 1.50 396679 1 0.01 0.00 0.00 0.01 0.03% 125.50 127.00 1.50 396681 <1 0.03 0.00 0.00 0.02 0.05% 127.00 128.10 1.10 396682 1 0.02 0.00 0.00 0.04 0.05% 128.10 129.50 1.40 396683 <1 0.02 0.03 0.00 0.03 0.07% 129.50 130.70 1.20 396684 <1 0.02 0.03 0.01 0.06 0.08% 130.70 131.70 1.00 396685 9 0.28

NINE MILE METALS COMMENCES TRADING ON THE OTCQB VENTURE MARKET EXCHANGE

NINE MILE METALS COMMENCES TRADING ON THE OTCQB VENTURE MARKET EXCHANGE   TORONTO, ON / ACCESS Newswire / October 8, 2026 / Nine Mile Metals Ltd. (CSE:NINE)(OTCID:VMSXF)(FSE:KQ9) (the “Company” or “Nine Mile”) is pleased to announce that its common shares have been approved to trade on the OTCQB® Venture Market under its existing U.S. trading […]

NINE MILE METALS ANNOUNCES ADDITIONS TO MANAGEMENT TEAM AND BOARD OF DIRECTORS

TORONTO, ONTARIO, CANADA –  Friday, May 15, 2026, NINE MILE METALS LTD. (CSE: NINE, OTC PINK: VMSXF, FSE: KQ9) (the “Company” or “Nine Mile”), is pleased to announce the appointment of Jonathan Holmes as President and the appointment of Jonathan Held as an Independent Director of the Company, effective immediately. Patrick J. Cruickshank, MBA, CEO and Director stated “We are pleased to welcome our current director Jonathan Holmes to our Executive Management Team here at Nine Mile Metals. Jonathan has displayed strong leadership and helped guide over the past year as a director and supported the Team initiating our corporate branding, marketing and assisting on our capital markets initiatives. Jonathan’s transition to this role will be seamless and highly effective. I look forward to working closely with Jonathan as we continue advancing the Company’s strategic initiatives. We are also pleased to have Jonathan Held join our Board of Directors. His wealth of experience and knowledge of capital markets including corporate structuring will be a valuable addition as we continue to advance the Company. We have an aggressive exploration program planned for 2026 and have established significant goals for the Company.” Jonathan Holmes has served on the Board of Directors of Nine Mile Metals since April 2025, supporting the Company’s corporate development, investor relations and capital markets initiatives. Mr. Holmes was also a founder and director of Reem Capital Corp. (TSXV: REEM), a Capital Pool Company that completed its qualifying transaction with Seegnal Inc. (TSXV: SEGN) in 2025. He previously served as co-founder and Managing Director of INN Australia from 2021 to 2025 and spent over 15 years with Dig Media Inc., the parent company of the Investing News Network (INN), where he held senior leadership roles including Director and Partner. Throughout his career, Mr. Holmes has worked with more than 200 publicly listed companies across Canada, Australia and the United Kingdom, specializing in capital markets, corporate development and investor relations. Mr. Holmes is a member of the Institute of Corporate Directors (Canada) and the Canadian Institute of Mining, Metallurgy and Petroleum (CIM), and was previously a member of the Australian Institute of Company Directors. Jonathan Holmes, President, stated “I’m excited to take on the role of President of Nine Mile Metals at an important stage for the Company. Having served on the Board over the past year, I’ve had the opportunity to work closely with the team and support a number of the Company’s corporate development and capital markets initiatives. I look forward to being on site in late May as we commence our next exploration program in the world-class Bathurst Mining Camp, while working more closely with the management team to help lead the Company into its next chapter.” Mr. Held, CPA, CA, is a seasoned financial executive with over fifteen years of experience working with both public and private companies. Mr. Held is a Partner at ALOE Finance, a boutique firm specializing in transaction advisory and senior-level finance solutions. Mr. Held has worked across a number of sectors, including natural resources, technology and biotechnology, both domestically and internationally. His experience includes leading numerous successful public listings through IPOs and RTOs, as well as multiple M&A transactions and financings. Mr. Held has held director and officer roles with numerous public companies, including serving as CFO and a director of Signature Resources for over nine years. He holds a Bachelor of Mathematics and a Master of Accounting from the University of Waterloo. The Company has also granted an aggregate of 14,550,000 incentive stock options to certain directors, officers, committee members and consultants, pursuant to the Company’s stock option plan. The options are exercisable at a price of $0.08 per share for a period of 5 years from the date of grant and vest immediately. This represents the first option grant to management or directors since April 2024. About Nine Mile Metals Ltd.: Nine Mile Metals Ltd. is a Canadian public mineral exploration company focused on VMS (Cu, Pb, Zn, Ag and Au) exploration in the world-famous Bathurst Mining Camp, New Brunswick, Canada. The Company’s primary business objective is to explore its four VMS Projects: Wedge VMS Project, Nine Mile Brook VMS Project, California Lake VMS Project, and the Canoe Landing Lake (East – West) VMS Project. The Company is focused on Critical Minerals Exploration (CME), positioning for the boom in EV and green technologies requiring Copper, Silver, Lead and Zinc with a hedge with Gold. Social Media    @NineMileMetals   Nine Mile Metals   @ Nine Mile Metals ON BEHALF OF NINE MILE METALS LTD. “Patrick J Cruickshank, MBA”CEO and DirectorT: +1.506-804-6117E: info@ninemilemetals.com This press release may include forward-looking information within the meaning of Canadian securities legislation, concerning the business of Nine Mile. Forward-looking information is based on certain key expectations and assumptions made by the management of Nine Mile. In some cases, you can identify forward-looking statements by the use of words such as “will,” “may,” “would,” “expect,” “intend,” “plan,” “seek,” “anticipate,” “believe,” “estimate,” “predict,” “potential,” “continue,” “likely,” “could” and variations of these terms and similar expressions, or the negative of these terms or similar expressions. . Forward-looking statements in this press release include that (a)  prior to commencing the 2023 exploration drill program, the ground will be mapped at surface and representative samples analyzed to determine the base and precious metal assay values , (b) the Ag and Au values will be reported upon receipt of the certified assay results from ALS Global, and (c) our current financial raise will enable us to drill the Wedge Project (along with our Canoe Landing VMS Project and follow up exploration work on our California Lake VMS Project) this season as opposed to next year. Although Nine Mile believes that the expectations and assumptions on which such forward-looking information is based are reasonable, undue reliance should not be placed on the forward-looking information because Nine Mile can give no assurance that they will prove to be correct. The Canadian Securities Exchange (CSE) has not reviewed and does not accept responsibility

NINE MILE METALS ANNOUNCES CLOSING OF PRIVATE PLACEMENT

Not for distribution to United States newswire services or for dissemination in the United States Toronto, Ontario – April 22, 2026 – Nine Mile Metals Ltd. (CSE: NINE) (OTC Pink: VMSXF) (FSE: KQ9) (“Nine Mile” or the “Company”) is pleased to announce that it has completed a non-brokered private placement financing for gross proceeds of $1,000,020 through the issuance of 7,143,000 units of the Company (each, a “Unit”) at a price of $0.14 per Unit (the “Offering”). Each Unit is comprised of: (i) one (1) common share of the Company (a “Common Share”) that qualifies as a “flow-through share”; and (ii) one (1) common share purchase warrant of the Company (a “Warrant”), with each Warrant exercisable into one (1) Common Share at a price of $0.30 for a period of two (2) years, provided that if the daily volume-weighted average trading price of the Common Shares on the CSE equals or exceeds $0.50 for ten (10) consecutive trading days, the Company may, at its discretion, accelerate the expiry date of the Warrants by providing not less than thirty (30) days’ notice to Warrant holders via press release. In connection with the Offering, the Company paid finders fees of $80,001.60 and issued 571,440 finders warrants (the “Finders Warrants”). Each Finders Warrant will be exercisable for one (1) additional Common Share at a price of $0.14 for a period of two (2) years. The Company intends to use the proceeds of the Offering for exploration activities on its critical minerals projects in the Bathurst Mining Camp. The Common Shares, and any Common Shares to be issued on exercise of the Warrants or Finders Warrants, are subject to a hold period under applicable Canadian securities laws expiring four (4) months and one (1) day from the date of issuance. About Nine Mile Nine Mile Metals Ltd. is a Canadian public mineral exploration company focused on VMS (Cu, Pb, Zn, Ag and Au) exploration in the world-famous Bathurst Mining Camp, New Brunswick, Canada. The Company’s primary business objective is to explore its four VMS Projects: Nine Mile Brook VMS Project; California Lake VMS Project; Canoe Landing Lake (East – West) Project and the Wedge VMS Project. The Company is focused on exploration of Minerals for Technology (MFT), positioning for the boom in EV and green technologies requiring Copper, Silver, Lead and Zinc with a hedge with Gold. ON BEHALF OF NINE MILE METALS LTD., “Patrick J. Cruickshank, MBA” CEO and Director T: 506-804-6117 E: patrick@ninemilemetals.com Cautionary Statement Regarding Forward-Looking Information This news release contains certain “forward-looking information” within the meaning of Canadian securities legislation, including, but not limited to, statements regarding the Company’s plans with respect to the Company’s projects and the timing related thereto, the merits of the Company’s projects, the Company’s objectives, plans and strategies, the Offering, the listing of the Common Shares on the CSE, the use of proceeds of the Offering and other matters. Although the Company believes that such statements are reasonable, it can give no assurance that such expectations will prove to be correct. Forward-looking statements are statements that are not historical facts; they are generally, but not always, identified by the words “expects,” “plans,” “anticipates,” “believes,” “intends,” “estimates,” “projects,” “aims,” “potential,” “goal,” “objective,”, “strategy”, “prospective,” and similar expressions, or that events or conditions “will,” “would,” “may,” “can,” “could” or “should” occur, or are those statements, which, by their nature, refer to future events. The Company cautions that forward-looking statements are based on the beliefs, estimates and opinions of the Company’s management on the date the statements are made and they involve a number of risks and uncertainties. Consequently, there can be no assurances that such statements will prove to be accurate and actual results and future events could differ materially from those anticipated in such statements. Except to the extent required by applicable securities laws and the policies of the CSE, the Company undertakes no obligation to update these forward-looking statements if management’s beliefs, estimates or opinions, or other factors, should change. Factors that could cause future results to differ materially from those anticipated in these forward-looking statements include the risk of accidents and other risks associated with mineral exploration operations, the risk that the Company will encounter unanticipated geological factors, or the possibility that the Company may not be able to secure permitting and other agency or governmental clearances, necessary to carry out the Company’s exploration plans, risks of political uncertainties and regulatory or legal changes in the jurisdictions where the Company carries on its business that might interfere with the Company’s business and prospects. The reader is urged to refer to the Company’s reports, publicly available through the Canadian Securities Administrators’ System for Electronic Data Analysis and Retrieval + (SEDAR+) at www.sedarplus.ca for a more complete discussion of such risk factors and their potential effects. The Canadian Securities Exchange has not reviewed and does not accept responsibility for the adequacy or the accuracy of the contents of this release.

NINE MILE METALS ANNOUNCES PRIVATE PLACEMENT OF UP TO $1 MILLION

Not for distribution to United States newswire services or for dissemination in the United States Toronto, Ontario – April 15, 2026 – Nine Mile Metals Ltd. (CSE: NINE) (OTC Pink: VMSXF) (FSE: KQ9) (“Nine Mile” or the “Company”) is pleased to announce a non-brokered private placement financing for gross proceeds of up to $1,000,020 through the issuance of up to 7,143,000 units of the Company (each, a “Unit”) at a price of $0.14 per Unit (the “Offering”). Each Unit is comprised of: (i) one (1) common share of the Company (a “Common Share”) that qualifies as a “flow-through share”; and (ii) one (1) common share purchase warrant of the Company (a “Warrant”), with each Warrant exercisable into one (1) Common Share at a price of $0.30 for a period of two (2) years, provided that if the daily volume-weighted average trading price of the Common Shares on the CSE equals or exceeds $0.50 for ten (10) consecutive trading days, the Company may, at its discretion, accelerate the expiry date of the Warrants by providing not less than thirty (30) days’ notice to Warrant holders via press release. The Offering is expected to close on or about April 20, 2026, or such other date as the Company may determine, and is subject to certain conditions including, but not limited to, the receipt of all necessary regulatory and other approvals. The Company may pay finder’s fees in connection with the Offering comprised of cash equal to 8% of the gross proceeds of the Offering and finder warrants (the “Finders Warrants”) equal to 8% of the number of Units issued under the Offering. Each Finders Warrant will be exercisable for one (1) additional Common Share at a price of $0.14 for a period of two (2) years. The Company intends to use the proceeds of the Offering for exploration activities on its critical minerals projects in the Bathurst Mining Camp. The Common Shares, and any Common Shares to be issued on exercise of the Warrants and Finders Warrants, will be subject to a hold period under applicable Canadian securities laws expiring four (4) months and one (1) day from the date of issuance. About Nine Mile Nine Mile Metals Ltd. is a Canadian public mineral exploration company focused on VMS (Cu, Pb, Zn, Ag and Au) exploration in the world-famous Bathurst Mining Camp, New Brunswick, Canada. The Company’s primary business objective is to explore its four VMS Projects: Nine Mile Brook VMS Project; California Lake VMS Project; Canoe Landing Lake (East – West) Project and the Wedge VMS Project. The Company is focused on exploration of Minerals for Technology (MFT), positioning for the boom in EV and green technologies requiring Copper, Silver, Lead and Zinc with a hedge with Gold. ON BEHALF OF NINE MILE METALS LTD., “Patrick J. Cruickshank, MBA” CEO and Director T: 506-804-6117 E: patrick@ninemilemetals.com Cautionary Statement Regarding Forward-Looking Information This news release contains certain “forward-looking information” within the meaning of Canadian securities legislation, including, but not limited to, statements regarding the Company’s plans with respect to the Company’s projects and the timing related thereto, the merits of the Company’s projects, the Company’s objectives, plans and strategies, the Offering, the listing of the Common Shares on the CSE, the use of proceeds of the Offering and other matters. Although the Company believes that such statements are reasonable, it can give no assurance that such expectations will prove to be correct. Forward-looking statements are statements that are not historical facts; they are generally, but not always, identified by the words “expects,” “plans,” “anticipates,” “believes,” “intends,” “estimates,” “projects,” “aims,” “potential,” “goal,” “objective,”, “strategy”, “prospective,” and similar expressions, or that events or conditions “will,” “would,” “may,” “can,” “could” or “should” occur, or are those statements, which, by their nature, refer to future events. The Company cautions that forward-looking statements are based on the beliefs, estimates and opinions of the Company’s management on the date the statements are made and they involve a number of risks and uncertainties. Consequently, there can be no assurances that such statements will prove to be accurate and actual results and future events could differ materially from those anticipated in such statements. Except to the extent required by applicable securities laws and the policies of the CSE, the Company undertakes no obligation to update these forward-looking statements if management’s beliefs, estimates or opinions, or other factors, should change. Factors that could cause future results to differ materially from those anticipated in these forward-looking statements include the risk of accidents and other risks associated with mineral exploration operations, the risk that the Company will encounter unanticipated geological factors, or the possibility that the Company may not be able to secure permitting and other agency or governmental clearances, necessary to carry out the Company’s exploration plans, risks of political uncertainties and regulatory or legal changes in the jurisdictions where the Company carries on its business that might interfere with the Company’s business and prospects. The reader is urged to refer to the Company’s reports, publicly available through the Canadian Securities Administrators’ System for Electronic Data Analysis and Retrieval + (SEDAR+) at www.sedarplus.ca for a more complete discussion of such risk factors and their potential effects. The Canadian Securities Exchange has not reviewed and does not accept responsibility for the adequacy or the accuracy of the contents of this release.

NINE MILE METALS ANNOUNCES CERTIFIED ASSAYS FROM DDH-WD-25-02B OF 3.17% CUEQ OVER 15.00 METERS (7.47 g/t Ag, 0.21 g/t Au, 2.36 % Cu, 0.35% Pb, 1.29% Zn) INCLUDING 5.99% CUEQ OVER 6.84 METERS (14.50 g/t Ag, 0.34 g/t Au, 4.47% Cu, 0.75% Pb 2.58% Zn)

TORONTO, ONTARIO, CANADA –  THURSDAY,  April 2nd, 2026, NINE MILE METALS LTD. (CSE: NINE, OTC PINK: VMSXF, FSE: KQ9) (the “Company” or “Nine Mile”), is pleased to announce it has received certified assays for drill hole WD-25-2B at the Wedge Mine situated in the renowned Bathurst Mining Camp, New Brunswick (BMC). TABLE 1:     WD-25-02B  Overall Assay Summary (Weighted Averages) From To Width Cu Pb Zn Au Ag Cu Eq (m.) (m.) (m.) % % % g/t g/t %                       Upper Zone 56.00 62.00 6.00 0.80 1.48 2.66 0.45 45.50   3.20                     Lower Zone                     Overall 107.00 122.00 15.00 2.36 0.35 1.29 0.21 7.47   3.17                       including 115.16 122.00 6.84 4.47 0.75 2.58 0.34 14.50   5.99     TABLE 2:   Detailed Certified Assays,  Upper Zone (56.00 62.00 meters), and Lower Zone (107.00  – 122.00 meters) Sample # From To Width Ag Au Cu Pb Zn Cu Eq Upper Zone (m.) (m.) (m.) g/t g/t % % % %                     338307 56.00 59.00 3.00 40.00 0.44 0.87 2.22 4.19 3.67 338308 59.00 62.00 3.00 51.00 0.46 0.74 0.75 1.13 2.75  Lower Zone                 338326 107.00 110.00 3.00 2.00 0.07 0.48 0.01 0.14 0.65 338327 110.00 113.00 3.00 2.00 0.13 0.86 0.02 0.23 1.13 338328 113.00 114.00 1.00 1.00 0.09 0.45 0.00 0.13 0.62 338329 114.00 115.16 1.16 < 1.00 0.10 0.33 0.04 0.37 0.57 338330 115.16 116.00 0.84 18.00 0.47 1.27 0.68 3.75 3.32 338331 116.00 119.00 3.00 11.00 0.27 6.74 0.50 1.82 7.86 338332 119.00 122.00 3.00 17.00 0.38 3.11 1.02 3.02 4.88 Figure 1: Cross Section Drill Hole WD-25-02B & WD-25-01, Geology, Cu and Zn Assays.  FIGURE 2: Sample # 338331 (6.74% Cu)  and  Sample # 338332 (3.11% Cu), Gary Lohman, P.Geo, VP Exploration, Director stated, “Drilling continues to intersect massive copper bearing mineralization in the western portion of the Wedge as seen above in Figure 2. Prior to new drilling in May 2026, (3) BHEM surveys will be conducted on last fall’s previous holes, to assist in vectoring in on recently defined new VMS Zones and associated high-grade copper mineralization, (2) BHEM surveys in the Northwest area and (1) BHEM survey in the high-grade Southwest Area”. Patrick J. Cruickshank, MBA, CEO & Director, stated “we are thrilled with the results of this hole. The drill results continue to show impressive high-grade results through different styles and zonation of mineralization. We have seen High Grade Cu, High Grade Cu with Ag, Huge Grade Cu with Au, and  a traditional VMS lens model. Had this hole not terminated due to a fault and water loss, we would have truly seen a special high-grade Cu – Ag Lens. Our Spring Phase 3 drill program will be exciting, and we will be able to drill from locations that best expose the value this deposit has to offer. We will drill  from the other side of this fault and expose the entire High-Grade Lens and its magnitude. Having multiple zonation’s of mineralization is a valuable perspective and brings a host of opportunity for us. We look forward to sharing our next result & launching our Phase 3 program including our West Wedge & Tribag Drill initiative.”  FIGURE 3: Massive Copper bearing, Pyritic VMS FIGURE 4: Drill Hole Locations, WD-25-01, WD-25-02B     TABLE 3: Summary of Results, Drill Holes WD-25-01, WD-25-02 and WD-25-02B  HOLE #   From To Width Ag Au Cu Pb Zn Cu Eq     (m.) (m.) (m.) g/t g/t % % % %     WD-25-01*                         Overall 156.05 178.70 22.65 39.52 0.96 0.99 2.25 1.61 3.75                       Includes 161.05 178.70 17.65 42.50 1.01 1.20 2.62 2.05 4.26     160.05 173.05 13.00 50.33 1.21 0.39 3.23 2.45 4.06                       WD-25-02* OVERALL 138.72 170.82 32.10 14.09 0.35 1.53 0.47 1.81 2.80                         Zone 1 138.72 141.22 2.50 61.57 1.01 3.09 1.02 4.88 7.03                         Zone 2 150.30 165.32 15.02 11.00 0.40 2.14 0.52 1.00 3.21                         159.30 170.82 11.52 17.00 0.43 3.20 0.48 2.48 4.81     159.30 165.32 6.02 17.00 0.42 4.63 0.27 0.79 5.75                         Zone 3 168.00 170.82 2.82 36.65 0.72 2.91 0.96 7.13 6.58                 WD-25-02B                                   Zone 1 56.00 62.00 6.00 45.50 0.45 0.80 1.48 2.66 3.20                       Zone 2 107.00 122.00 15.00 7.47 0.21 2.36 0.35 1.29 3.17                         including 115.16 122.00 6.84 14.50 0.34 4.47 0.75 2.58 5.99 * WD-25-01 released on March 12, 2026, WD-25-02 released on February 17, 2026 Analysis and QAQC All samples were submitted to and analyzed at ALS Canada Ltd. (ALS), an independent commercial laboratory for both the sample preparation and assaying. ALS is a commercial laboratory independent of Nine Mile Metals Ltd. Samples submitted through ALS are run through standard preparation methods and analysed using Code ME-ICP61A which is a high-grade four acid digestion and ICP+AES analysis. Gold analysis is done by standard fire assay (Au-AA23) using a 30-gram sample. Overlimit assays are done by gravimetric analysis (Au-GRA21). ALS undertakes their own QA/AC protocols including coarse and pulp duplicate analysis to ensure proper sample

NINE MILE METALS ANNOUNCES CERTIFIED ASSAYS FROM DDH-WD-25-01 OF 3.83% CUEQ OVER 22.65 METERS (39.52 g/t Ag, 0.96 g/t Au, 0.99% Cu, 2.25% Pb, 1.61% Zn) AND 4.33% CUEQ OVER 17.65 METERS (42.5 g/t Ag, 1.01 g/t Au, 1.2% Cu, 2.62% Pb, 2.05% Zn)
INCLUDING 1.21 G/T AU AND 50.33 G/T AG OVER 13.00 METERS

TORONTO, ON, Thursday, March 12th, 2026 – NINE MILE METALS LTD. (CSE: NINE, OTC-PINK: VMSXF, FSE: KQ9)-(the “Company” or “Nine Mile”) is pleased to announce it has received certified assays for drill hole WD-25-01 at the Wedge Mine situated in the renowned Bathurst Mining Camp, New Brunswick (BMC). WD-25-01  HIGHLIGHTS: TABLE 1:  Assay Summary (Weighted Averages)     From To Width Ag Au Cu Pb Zn Cu Eq     (m.) (m.) (m.) g/t g/t % % % %                       Overall   156.05 178.70 22.65 39.52 0.96 0.99 2.25 1.61 3.83                       Includes   161.05 178.70 17.65 42.50 1.01 1.20 2.62 2.05 4.33                           160.05 173.05 13.00 50.33 1.21 0.39 3.23 2.45 4.14 TABLE 2: Certified Assays,  (156.05 – 178.70 meters) Sample  From To Width Ag Au Cu Pb Zn Cu Eq # (m.) (m.) (m.) g/t g/t % % % %                     338213 156.05 157.05 1.00 21.30 0.64 0.17 0.78 0.07 1.59 338214 157.05 158.05 1.00 24.10 0.82 0.39 0.69 0.05 2.09 338215 158.05 159.05 1.00 35.80 0.86 0.28 1.19 0.06 2.36 338216 159.05 160.05 1.00 38.00 0.81 0.33 1.34 0.07 2.41 338217 160.05 161.05 1.00 25.90 0.91 0.20 0.70 0.06 2.06 338218 161.05 162.05 1.00 148.00 1.12 0.49 5.37 0.69 6.08 338219 162.05 163.05 1.00 71.10 1.32 0.31 3.37 0.53 4.18 338220 163.05 164.05 1.00 63.20 1.10 0.30 2.77 0.72 3.68 338221 164.05 165.05 1.00 58.60 1.72 0.52 2.31 0.14 4.39 338222 165.05 166.05 1.00 116.00 0.38 0.25 13.90 8.62 7.47 338223 166.05 167.05 1.00 55.60 1.05 0.28 10.40 19.30 9.29 338224 167.05 168.05 1.00 35.30 1.42 0.29 1.50 1.22 3.43 338225 168.05 169.05 1.00 17.40 1.52 0.30 0.42 0.07 2.73 338226 169.05 170.05 1.00 19.70 1.64 0.42 0.50 0.45 3.17 338227 170.05 171.05 1.00 15.40 1.44 0.49 0.38 0.07 2.77 338228 171.05 172.05 1.00 14.40 1.14 0.76 0.19 0.03 2.59 338229 172.05 173.05 1.00 13.70 1.04 0.50 0.19 0.03 2.18 338230 173.05 174.05 1.00 11.90 0.89 0.71 0.33 0.02 2.18 338231 174.05 175.05 1.00 18.60 0.82 1.73 0.75 0.06 3.32 338232 175.05 176.05 1.00 26.90 0.73 3.33 1.42 0.95 5.31 338233 176.05 177.05 1.00 50.30 0.26 3.52 2.12 0.57 5.39 338234 177.05 177.60 0.55 10.60 0.20 4.05 0.12 2.08 5.08 338235 177.60 178.70 1.10 7.40 0.12 4.34 0.25 1.44 5.06 VMS mineralization occurs between 156.05 and 178.70 meters. Locally visible Chalcopyrite, Sphalerite and Galena occur as seen in the figures 3, 4 and 5 below. “This drill hole was intriguing, not only confirming the presence of high-grade copper at depth but also containing a significant precious metal component previously not recognized or reported at the Wedge. In our 2024 drilling on the eastern extension, both Au and Ag are present in the assays however the widths were much smaller and associated with copper, lead and zinc rich intervals. This further demonstrates the robust nature of the mineralization at the Wedge” commented Gary Lohman, P.Geo., VP Exploration & Director. Patrick J. Cruickshank, MBA, CEO & Director, stated “Tremendous result on Hole WD-25-1 at the Wedge Mine. This clearly demonstrates the high-grade nature and the diverse composition at the Wedge Deposit. This is a completely different VMS Style Lens again. This is a diverse and unique deposit that continues to show its economic and high-grade potential. This is a high-grade Gold – Silver Burst not a Copper only style like Lens #3 we discovered. We look forward to our 2026 Drill Program at this deposit and unlock more high-grade surprises at depth and along the western corridor.”  Analysis and QAQC All samples were submitted to and analyzed at Activation Laboratories Ltd. (ActLabs) Ancaster Ontario, an independent commercial laboratory for both the sample preparation and assaying. Actlabs is a commercial laboratory independent of Nine Mile Metals Ltd. Samples submitted through Actlabs are run through standard preparation methods and analysed using Code 8 Peroxide ICP-OES+MS which is a high-grade four acid digestion and ICP+MS analysis. Gold analysis is done by standard fire assay (1A2) using a 30-gram sample. Overlimit assays are done by gravimetric analysis (1A3). Actlabs undertakes their own QA/AC protocols including coarse and pulp duplicate analysis to ensure proper sample preparation and equipment calibration.  Nine Mile’s QAQC program includes regular insertion of CRM standards, duplicates, and blanks into the sample stream with a stringent review of all results. QAQC and data validation was performed, and no material errors were observed. The disclosure of technical information in this news release has been prepared in accordance with Canadian regulatory requirements as set out in National Instrument 43-101 – Standards of Disclosure for Mineral Projects (“NI 43-101”) and reviewed and approved by Gary Lohman, B.Sc., PGeo., VP Exploration and Director who acts as the Company’s Qualified Person, and is not independent of the Company. Copper Equivalent (Cu-Eq) for the drill hole samples is calculated based on March 6, 2026, pricing: US$ 5.78/lb Cu, US$ 0.86/lb Pb, US$ 1.47/lb Zn, US$ 84.34/oz Ag, and US$ 5172.00/oz Au, with 80% metallurgical recoveries assumed for all metals. Since it is unclear which metals will be the principal products, assuming different recoveries is premature at this stage. Therefore, an 80% recovery rate is justified. About Nine Mile Metals Ltd.:Nine Mile Metals Ltd. is a Canadian public mineral exploration company focused on VMS (Cu, Pb, Zn, Ag and Au) exploration in the world-famous Bathurst Mining Camp, New Brunswick, Canada. The Company’s primary business objective is to explore its four VMS Projects: Nine Mile Brook VMS Project; California Lake VMS Project; and the Canoe Landing Lake (East – West) Project and the Wedge VMS Project. The Company is focused on exploration of Minerals for Technology (MFT), positioning for the boom in EV and green technologies requiring Copper, Silver, Lead and Zinc with a hedge with Gold. ON BEHALF OF NINE MILE METALS LTD. “Patrick J. Cruickshank, MBA”CEO

Subscribe To Our Newsletter

Get notified about the latest company news and updates by signing up below.